Anchor Audio MINI-70 käyttöohje

Anchor Audio MINI-70
(1)
  • Sivuluku: 1
  • Tiedoston tyyppi: PDF
  • The general construction shall include an injection molded case; one 4 inch power and input termination consisting of quick connect/release bare-wire terminals.
    The maximum speaker dimensions shall be 5.5 inches high x 5.5 inches wide x 6.5 inches deep. The maximum weight shall be 2 pounds.
    The black case shall be constructed of injection-molded ABS.
    The speaker monitor shall have the ability to mount on walls, ceilings, equipment racks or speaker stands with appropriate hardware and accessories.
    The system shall incorporate a line transformer for use with 70.7V distributed line systems, multiple taps of 5W, 10W and 15W will be provided.
    The system shall be the Anchor Audio MINI-70.

    Architectural Specifications

    Frequency Range 80 Hz - 20 kHz (-10 dB)
    Nominal Sensitivity 97dB, 5W @ 1 m (3.3ft)
    105dB, 10W @ 1 m(3.3ft)
    108db, 15W @1 m(3.3ft)
    Input Selection 70 V-line transformer taps @ 5W, 10W, and 15W
    Transducers
    Low-Frequency 4” (100 mm) woofer
    1” (25 mm) voice coil on aluminum former
    Physical
    Enclosure Material ABS(black), polycarbonate colors
    Mounting Use with SB-30BK wall mount
    Color Black
    Dimensions (HWD) 5.5” x5.5” x 6.5” (14 x 14 x 16.5 cm)
    Net Weight (ea) 2 lbs/ 1 Kg

    Technical Specifications

    MINI-70 Speaker Monitor

    The MINI-70 is a full-range loudspeaker system engineered to provide quality
    full-range sound projection in a variety of outdoor and indoor applications. Its wide
    range, enhanced mid range response and high efciency ensure superb projection
    of clear intelligible speech. A 70 volt line transformer with three taps provides
    adjustable power setting.
    * Multiply the number of speakers on each channel by 15 watts to obtain the optimum amplier power rating.
    EXAMPLE 1: Five speakers per channel requires an amplier rated at 75 watts per channel. If some speakers will be set to the 5 or 10 watt taps then the minimum necessary amplier power will be less.
    EXAMPLE 2: Five speakers at 15 watts, two speakers at 10 watts and two speaker at 5 watts would require an amplier rated at 105 watts minimum per channel.
    Ampliers rated at signicantly more than the minimum calculated power can be safely used so long as their line output is 70 volts. Do not use the MINI-70 on 100 volt line systems. In no case should the system
    volume be set to a level that produces distortion. Distortion typically occurs when an UNDERPOWERED amplier is used.
    Enhanced Speech Intelligibility
    Smooth Frequency Response
    Ease of Mounting with U Bracket
    Built-In top Quality 70 Volt Line Transformer with Minimal Saturation
    4” (100 mm) Woofer
    Push Terminals

    Features

    MADE IN USA
    SIX YEAR WARRANTY

    Anchor Audio, Inc. 800.262.4671

    Portable Sound Systems • Carlsbad, California www.anchoraudio.com

    Technical Specications

    (Features & Specications Subject To Change Without Notice)
Anchor Audio MINI-70

Tarvitsetko apua?

Kysymysten lukumäärä: 0

Onko sinulla kysyttävää tuotteesta Anchor Audio MINI-70 tai tarvitsetko apua? Esitä kysymyksesi täällä. Anna selkeä ja kattava kuvaus asiasta ja kysymyksestäsi. Mitä yksityiskohtaisemmin kuvaat asiaasi ja kysymystäsi, sitä helpompi muiden Anchor Audio MINI-70 omistajien on vastata kysymykseesi oikein.

Katso Anchor Audio MINI-70 käyttöohjeet täältä ilmaiseksi. Tämä opas kuuluu luokkaan Kaiuttimet, ja sen on arvioinut 1 ihmistä keskimäärin arvosanalla 7.5. Tämä opas on saatavana seuraavilla kielillä: Englanti. Onko sinulla kysyttävää tuotteesta Anchor Audio MINI-70 tai tarvitsetko apua? Esitä kysymyksesi täällä

Anchor Audio MINI-70 – tekniset tiedot

Yleistä
Tuotemerkki Anchor Audio
Malli MINI-70
Tuote Kaiutin
EAN
Kieli Englanti
Tiedoston tyyppi PDF

Usein Kysytyt Kysymykset

Alta löydät useimmin kysytyt kysymykset aiheesta Anchor Audio MINI-70.

Eikö kysymystäsi ole listassa? Esitä kysymyksesi täällä