Auriol 2-LD2970-8 käyttöohje

Auriol 2-LD2970-8
(1)
  • Sivuluku: 6
  • Tiedoston tyyppi: PDF
  • 2-LD2970-3

    2-LD2970-4

    2-LD2970-5

    2-LD2970-6

    2-LD2970-7

    2-LD2970-8

    ...1-5
    G/I
    d
    Edition 1
    ...6-10
    Cleaning instructions
    Clean the product with a dry, lint-free cloth. A glasses cleaning cloth is ideal.
    Intended use
    This electronic appliance is intended for time display and the described additional features. Any
    other use or modification of the electronic appliance does not comply with the intended uses.
    The manufacturer is not liable for damages caused by improper use or misuse. The device is
    not intended for commercial use.
    Manually initiate radio reception
    Radio time signal reception can be started manually.
    Press A to select the date display mode.
    Press and hold A for 3 seconds. The reception is started and the radio reception control symbol
    R will appear blinking on the display. Radio reception takes between 3 and 9 minutes to
    complete and can be interrupted by pressing any button.
    The radio reception control symbol R will appear continuously on the display while the reception
    is successful.
    Changing the time zone
    Press A to select time zone display mode.
    Press and hold B for 3 seconds. Press A to select the correct time zone:
    Uk = Greenwich Mean Time (UTC), GE = Central European Time (UTC+1), GR = Eastern
    Europe (UTC+2).
    Confirm your selection by pressing B. The hands will automatically move to the appropriate
    time.
    Manual time setting
    Press A to select the date display mode. Press and hold B for 3 seconds.
    The hours will blink on the display. Set the hours by pressing A and confirm your setting by
    pressing B.
    The minutes will blink on the display. Set the minutes by pressing A and confirm your setting by
    pressing B.
    The hands will automatically move to the appropriate time.
    Day of the week language selection
    Press A to select the day of the week display mode. Press and hold B for three seconds.
    The set language will blink on the display. Select your preferred language by pressing A:
    En = English, DE = German.
    Confirm your selection by pressing B.
    Reset and calibration
    Replacing the battery, strong magnetic fields or strong vibrations may cause the hands to lose
    synchronisation with the internal time.
    In this case the hands must be recalibrated.
    Press and hold A and B together for 5 seconds.
    'HP' will appear blinking on the display.
    Press A to turn the minute hand by on sixth of a minute.
    Press and hold A for speed setting. The minute hand will turn continuously and can be stopped
    by pressing any button.
    Turn the minute hand to exactly 12 o'clock and press B.
    The hour digits will appear blinking on the display.
    If the hour shown on the display does not correspond to the time shown by the hands, the
    correct hour must be set. Press A to set the hours and press B to confirm your setting.
    The watch will now attempt radio reception.
    Water resistance
    Water resistant up to 5 bar. The bar value specifies the atmospheric overpressure which is applied
    during testing (DIN 8310).
    -2-
    -3-
    3 BAR WATER RESISTANT
    5 BAR WATER RESISTANT
    10 BAR WATER RESISTANT
    20 BAR WATER RESISTANT
    G/I
    G/I
    Radio controlled wrist watch
    Display modes
    Press A to select one of the display modes of the wrist watch:
    Safety notes
    This electronic appliance must be protected from water and other hazards. It is not a toy
    and children should not use it unsupervised.
    -1-
    G/I
    Disposal of the electronic appliance
    This electronic appliance may not be disposed of with normal household waste.
    Dispose of the unit at an approved disposal facility or at your local recycling centre.
    Please observe the current rules and regulations when disposing of the appliance.
    Contact the disposal system if in doubt.
    Replacement of battery
    Battery replacements must be performed by an expert to avoid damaging the case or gaskets.
    Disposal of the batteries
    Please dispose of your batteries properly in containers especially set up at retailers.
    Batteries do not belong in household waste. Dispose of the batteries at an approved
    disposal facility or at your local recycling centre. Contact the disposal system if in doubt.
    Warranty
    We provide a 3-year warranty for this item. The warranty period starts from the date of sale
    (receipt, proof of purchase). Within this period we rectify all faults which are attributable to
    material and manufacturing defects at no cost. For damage which is attributable to improper
    treatment, e.g. dropping, knocking, or water damage, there is no warranty claim.
    Declaration of Conformity
    If used as intended this product conforms to the basic standards of § 3 and the other relevant
    provisions of the FTEG (Section 3 of the R&TTE directive). The declaration of conformity may
    be requested here: conformity@digi-tech-gmbh.com
    (2-LD2970-3/4/5 = CR2032H, 2-LD2970-6/7/8 = CR1620)
    -4-
    G/I
    -5-
    Strap Shortening Instructions
    Your watch strap may be shortened in two ways.
    1. At the buckle (Illustration 1)
    Unlock the safety cover (if applicable) and open the buckle. The strap is held in position by a
    spring bar. The spring bar can be compressed with a pointed tool to enable shortening of the
    strap. Move the strap to the desired position and allow the spring bar to lock into place.
    2. At the strap (Illustration 2)
    Shortening of the strap can also be achieved by removing segments. Open the buckle and
    remove the spring bar as described in part 1.
    Place the watch on a soft surface with the dial facing downward. The segments that can be
    removed are marked with an arrow. Push a pointed tool into the opening on the backside of the
    strap and push the bolt out of the strap in the direction of the arrow. Pull out the bolt (you may
    need to use tweezers).
    The strap can now be disassembled.
    Remove as many segments as necessary in the described fashion and reassemble the strap by
    pushing the bolt inwards in the opposite direction of the arrow. Reassemble the buckle with the
    spring bar.
    1. 2.
    G/I
    date day of the week time zone seconds
Auriol 2-LD2970-8

Tarvitsetko apua?

Kysymysten lukumäärä: 0

Onko sinulla kysyttävää tuotteesta Auriol 2-LD2970-8 tai tarvitsetko apua? Esitä kysymyksesi täällä. Anna selkeä ja kattava kuvaus asiasta ja kysymyksestäsi. Mitä yksityiskohtaisemmin kuvaat asiaasi ja kysymystäsi, sitä helpompi muiden Auriol 2-LD2970-8 omistajien on vastata kysymykseesi oikein.

Katso Auriol 2-LD2970-8 käyttöohjeet täältä ilmaiseksi. Tämä opas kuuluu luokkaan Rannekellot, ja sen on arvioinut 1 ihmistä keskimäärin arvosanalla 7.5. Tämä opas on saatavana seuraavilla kielillä: Englanti. Onko sinulla kysyttävää tuotteesta Auriol 2-LD2970-8 tai tarvitsetko apua? Esitä kysymyksesi täällä

Auriol 2-LD2970-8 – tekniset tiedot

Yleistä
Tuotemerkki Auriol
Malli 2-LD2970-8
Tuote Rannekello
Kieli Englanti
Tiedoston tyyppi PDF

Usein Kysytyt Kysymykset

Alta löydät useimmin kysytyt kysymykset aiheesta Auriol 2-LD2970-8.

Eikö kysymystäsi ole listassa? Esitä kysymyksesi täällä