Casio Collection W-800H-1AVES

Casio Collection W-800H-1AVES käyttöohje

(1)
  • 1
    Operation Guide 2499/3092
    Alarm
    The multi-function alarm lets you specify the hour,
    minutes, month, and day for the alarm. You can set up the
    alarm so it sounds once when the alarm time is reached,
    or for a snooze alarm that repeats up to seven times,
    every five minutes.
    You can also turn on an Hourly Time Signal that causes
    the watch to beep twice every hour on the hour.
    Pressing D in the Alarm Mode toggles between the
    alarm screen (Alarm time displayed) and the Hourly
    Time Signal screen (
    :00
    displayed).
    An alarm setting (and an Hourly Time Signal setting) is
    available in the Alarm Mode, which you enter by
    pressing C.
    Timekeeping
    Use the Timekeeping Mode to set and view the current
    time and date.
    To set the time and date
    1. In the Timekeeping Mode, hold down A until the
    seconds start to flash, which indicates the setting
    screen.
    2. Press C to move the flashing in the sequence shown
    below to select other settings.
    Seconds Hour
    Minutes
    Day Month
    Year
    MA0702-EA
    About This Manual
    The operational procedures for Modules 2499 and 3092 are identical. All of the
    illustrations in this manual show Module 2499.
    Button operations are indicated using the letters shown in the illustration.
    Each section of this manual provides you with the information you need to perform
    operations in each mode. Further details and technical information can be found in
    the “Reference” section.
    Module 2499 Module 3092
    Timekeeping Mode
    Alarm Mode Stopwatch Mode Dual Time Mode
    Press .
    General Guide
    Press C to change from mode to mode.
    In any mode, press B to illuminate the display.
    In any mode, hold down C for about two seconds to return to the Timekeeping
    Mode.
    In the Alarm, Stopwatch and Dual Time modes, the watch always shows the current
    Timekeeping Mode time in the lower display area.
    Hour : Minutes Seconds
    Day of week
    PM indicator
    year
    Month – Da
    y
    3. When the setting you want to change is flashing, press D to change it as
    described below.
    To change this setting
    Seconds
    Hour, Minutes, Year, Month, Day
    Perform this button operation
    Press D to reset to 00.
    Press D to increase the setting.
    Pressing D while the seconds are in the range of 30 to 59 resets them to 00 and
    adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.
    4. Press A to exit the setting screen.
    The day of the week is automatically displayed in accordance with the date (year,
    month, and day) settings.
    The year can be set in the range of 2000 to 2099.
    The watchs built-in full automatic calendar automatically makes allowances for
    different month lengths and leap years. Once you set the date, there should be no
    reason to change it except after you have the watchs battery replaced.
    To toggle between 12-hour and 24-hour timekeeping
    In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and
    24-hour timekeeping.
    With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for
    times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
    hour digits for times in the range of midnight to 11:59 a.m.
    With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
    any indicator.
    The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
    applied in all other modes.
    Month Day
    Hour : Minutes
    Alarm Types
    The alarm type is determined by the settings you make, as described below.
    Daily alarm
    Set the hour and minutes for the alarm time. This type of setting causes the alarm to
    sound everyday at the time you set.
    Date alarm
    Set the month, day, hour and minutes for the alarm time. This type of setting causes
    the alarm to sound at the specific time, on the specific date you set.
    1-Month alarm
    Set the month, hour and minutes for the alarm time. This type of setting causes the
    alarm to sound everyday at time you set, only during the month you set.
    Monthly alarm
    Set the day, hour and minutes for the alarm time. This type of setting causes the alarm
    to sound every month at time you set, on the day you set.
    To set an alarm time
    1. In the Alarm Mode, press D to display the alarm
    screen.
    2. Hold down A until the hour setting of the alarm time
    starts to flash, which indicates the setting screen.
    This operation automatically turns on the one-time
    alarm.
    3. Press C to move the flashing in the sequence shown
    below to select other settings.
    Hour Minutes
    Month Day
    4. While a setting is flashing, press D to increase it.
    To set an alarm that does not include a month (Daily alarm, Monthly alarm),
    set x for the month. Press D until the x mark appears (between 12 and 1) while
    month setting is flashing.
    To set an alarm that does not include a day (Daily alarm, 1-Month alarm),
    set xx for the day. Press D until the xx mark appears (between the end of the
    month and 1) while the day setting is flashing.
    When setting the alarm time using the 12-hour format, take care to set the time
    correctly as a.m. or p.m. (P indicator).
    5. Press A to exit the setting screen.
    Alarm Operation
    The alarm tone sounds at the preset time for about 10 seconds. In the case of the
    snooze alarm, the alarm repeats up to seven times every five minutes.
    Pressing any button stops the alarm tone operation.
    The alarm and the Hourly Time Signal sound in all modes.
    To select the alarm type
    1. In the Alarm Mode, press D to display the alarm
    screen.
    2. Press A to cycle through the available alarm settings
    shown below.
    One-time
    alarm on
    Alarm off
    Snooze
    alarm on
    The alarm on indicator and the snooze alarm on
    indicator are shown on the display in all modes while
    these functions are turned on.
    The snooze alarm on indicator flashes during the
    5-minute intervals between alarms.
    Displaying the Alarm Mode setting screen automatically
    changes the alarm type to one-time alarm.
    Changing the Timekeeping Mode setting screen during a 5-minute interval between
    snooze alarms stops the current snooze alarm operation (but snooze alarm remains
    as the alarm type setting).
    If a snooze alarm time is reached while you are setting the current time in the
    Timekeeping Mode, the alarm sounds only once. Subsequent snooze alarm
    operations are not performed.
    Alarm on/off indicator
Casio Collection W-800H-1AVES

Tarvitsetko apua?

Kysymysten lukumäärä: 1

Onko sinulla kysyttävää tuotteesta Casio Collection W-800H-1AVES tai tarvitsetko apua? Esitä kysymyksesi täällä. Anna selkeä ja kattava kuvaus asiasta ja kysymyksestäsi. Mitä yksityiskohtaisemmin kuvaat asiaasi ja kysymystäsi, sitä helpompi muiden Casio Collection W-800H-1AVES omistajien on vastata kysymykseesi oikein.

Olavi koski, 30-9-2020 09:38:06 Ei kommentteja

Suomen kielinen käyttöohje

Vastaa tähän kysymykseen

Katso Casio Collection W-800H-1AVES käyttöohjeet täältä ilmaiseksi. Tämä opas kuuluu luokkaan Rannekellot, ja sen on arvioinut 1 ihmistä keskimäärin arvosanalla 7.5. Tämä opas on saatavana seuraavilla kielillä: Engels. Onko sinulla kysyttävää tuotteesta Casio Collection W-800H-1AVES tai tarvitsetko apua? Esitä kysymyksesi täällä

Casio Collection W-800H-1AVES – tekniset tiedot

Yleistä
Tuotemerkki Casio
Malli Collection W-800H-1AVES
Tuote Rannekello
Kieli Engels
Tiedoston tyyppi PDF

Usein Kysytyt Kysymykset

Alta löydät useimmin kysytyt kysymykset aiheesta Casio Collection W-800H-1AVES.

Eikö kysymystäsi ole listassa? Esitä kysymyksesi täällä

Käyttöoh.je

Etsitkö manuaalia? Käyttöoh.je varmistaa, että löydät hetkessä sen manuaalin, jota etsit. Meidän tietokantamme sisältää yli 1 miljoonaa PDF manuaalia yli 10,000 merkiltä. Lisäämme päivittäin viimeisimpiä manuaaleja, jotta löydät aina tuotteen jota etsit. Tämä on todella yksinkertaista: kirjoitat vaan tuotteen merkin ja tyypin hakupalkkiin, ja voit välittömästi katsoa valitsemaasi manuaalia ilmaisesti onlinessa..

Käyttöoh.je

© Copyright 2021 Käyttöoh.je. Kaikki oikeudet pidätetään.

Käytämme evästeitä jotta voimme antaa sinulle parhaan kokemuksen sivuillamme. Jos jatkat tämän sivuston käyttöä, oletamme että hyväksyt ne.

Lue lisää