Even before we started working on this product we thought of it as a
companion piece to our previous wireless products, a sequel of sorts
- The next chapter.
We knew it had to be special so we worked hard. And then we worked
even harder. Sharing this journey with you all has been the gift of a
lifetime and I hope you can see and experience our gratitude within this
product. Thank you!
Best Regards,
Andreas Vural, founder of Happy Plugs
CONNECT AND USE
Activate Bluetooth on your phone or device.
Remove the Air 1 earbuds from the charge case, and select “Air 1 by
Happy Plugs” on your phone/device to pair. Keep the earbuds within
20 cm / 7 inches apart from each other.
Insert the Air 1 earbuds into your ears. Adjust the angle to nd
your perfect t.
When inserting the Air 1 into your ears - make sure not to
touch the touch control surface. A four second touch turns the
earbud o.
CHARGING THE CASE
Charge your Air 1 case by connecting the included Micro-USB cable to
a USB power source. When the Air 1 case LED is turned on, the case is
charging. When the light turns o your Air 1 case is fully charged.
CHARGING THE EARBUDS
To charge the Air 1 earbuds place them in the charging case. When the
Air 1 earbud LED is turned on, the earbud is charging. Once the lights
turns o you Air 1 earbud is fully charged.
LED GUIDE
The Air 1 earbuds & case LEDs are lit up while charging. When fully
charged the light turns o. When removing the Air 1 from the case, the
earbuds’ LED will blink slowly while pairing to your bluetooth source
and blink fast while connecting to each other.
CALLS
Using the Air 1 for phone calls, both earbuds are active, but only the
right (R) earbud has dual microphones. This means that you need to
use the right (R) earbud when using just one earbud for phone calls.
To get the most out of your new Air 1 when used together with an
Apple Device; while your Air 1 is paired go into Settings > General
> Accessibility, scroll down to Call Audio Routing and select
Bluetooth Headset.
TOUCH CONTROLS
Both earbuds have a touch sensor (see illustration). Tap it with your
nger to control your calls and music according to the guide.
SIRI OR GOOGLE ASSISTANT
Control your calls and music with Siri or Google Assistant by pressing
2 sec on right (R) earbud.
To use Siri on your iPhone while it is locked, go into
Settings > Touch ID & Passcode, scroll down to Allow Access
when locked and enable Siri.
RESET TO FACTORY SETTINGS
If you need to reset your earbuds and terminate any previous bluetooth
pairing:
Delete Air 1 by Happy Plugs from your Bluetooth devices list.
Make sure the charge case is charged. Put the Earphones in the
charge case.
Touch and hold the touch sensors on both left and right earphones
for 10 seconds until the earphone LEDs blink 3 times.
Take the earphones out from the charge case and hold them close
together (within 10 cm) until the LED on the left earphone stops
blinking.
Connect to your Device.
HAPPY PLUGS AIR 1 USER MANUAL
TOUCH CONTROLS
Left (L) & Right (R) Earbud
Power On Hold 2 Seconds
Power O Hold 4 Seconds
Reset (In the case) Hold 10 Seconds
Left (L) Earbud
Volume Up Single Touch
Volume Down Double Touch
Right (R) Earbud (Music Controls)
Play / Pause Single Touch
Next Track Double Touch
Previous Track Triple Touch
Right (R) Earbud (Phone Call Controls)
Call Answer / Call End Single Touch
Reject Call Double Touch
Switch Call Hold 2 Seconds
Right (R) Earbud
Siri / Google Assistant Hold 2 Seconds
YOUR HAPPY PLUGS AIR 1
1. Air 1 Earbud
2. Air 1 Charge & Storage Case
3. Earbud Touch Control Sensor
4. Earbud LED
5. Microphone
6. Earbud Charge Cradle
7. Charging Pin
8. Charge Case LED
9. Charge Case Micro-USB Connection
10. Easy Opening Cut-Out
FULL INSTRUCTIONS & FAQ AVAILABLE AT:
HELP.HAPPYPLUGS.COM
Whatsapp
Mail
Facebook
Tarvitsetko apua?
Kysymysten lukumäärä: 1
Onko sinulla kysyttävää tuotteesta Happy Plugs AIR 1 tai tarvitsetko apua? Esitä kysymyksesi täällä. Anna selkeä ja kattava kuvaus asiasta ja kysymyksestäsi. Mitä yksityiskohtaisemmin kuvaat asiaasi ja kysymystäsi, sitä helpompi muiden Happy Plugs AIR 1 omistajien on vastata kysymykseesi oikein.
nita,
8-1-2021 18:13:57
Ei kommentteja
miksi toinen kuuloke ei toomi
Vastaa tähän kysymykseen
Tietoja Happy Plugs AIR 1
+7
Katso Happy Plugs AIR 1 käyttöohjeet täältä ilmaiseksi. Tämä opas kuuluu luokkaan Kuulokemikrofonit, ja sen on arvioinut 3 ihmistä keskimäärin arvosanalla 8.7. Tämä opas on saatavana seuraavilla kielillä: Engels. Onko sinulla kysyttävää tuotteesta Happy Plugs AIR 1 tai tarvitsetko apua? Esitä kysymyksesi täällä
Alta löydät useimmin kysytyt kysymykset aiheesta Happy Plugs AIR 1.
Milloin äänenvoimakkuus on liian korkea?
Yli 80 desibelin äänenvoimakkuus voi olla kuulolle haitallista. Kun äänenvoimakkuus ylittää 120 desibelin, voi jopa suoraa vahinkoa tapahtua. Vahinko kuulolle riippuu siitä, kuinka useasti ja kauan kuuntelet.
Voinko soittaa handsfree-puheluita Kuulokemikrofoni?
Uudemmissa Kuulokemikrofonit on yleensä pieni sisäänrakennettu mikrofoni, joka mahdollistaa soittamisen.
Mitä tarkoittaa vastamelu?
Vastamelu varmistaa, että ympäristön äänet vaimenevat.
miksi toinen kuuloke ei toomi