iHome iB22 käyttöohje

iHome iB22
(1)
  • Sivuluku: 2
  • Tiedoston tyyppi: PDF
  • Model: iB22 (Back)
    Print color : Black text on white paper
    Size of manual: 100mmW x 180mmH
    Date: Dec 6, 2012

    Limited Lifetime Warranty

    iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI
    Technologies), warrants this product to be free from defects in workmanship and
    materials, under normal use and conditions, for the lifetime of the product from
    the date of original purchase.
    Should this product fail to function in a satisfactory manner, it is best to first return
    it to the store where it was originally purchased. Should this fail to resolve the
    matter and service still be required by reason of any defect or malfunction during
    the warranty period, SDI Technologies will repair or, at its discretion, replace this
    product without charge (except for a $2.00 charge for handling, packing, return
    UPS/postage, and insurance). This decision is subject to verification of the defect
    or malfunction upon delivery of this product to the Factory Service Center listed
    below. The product must include proof of purchase, including date of purchase.
    The fee for service without proof of purchase is $4.00.
    Before returning this product for service, please first replace the batteries (if
    applicable) with fresh ones, as exhausted or defective batteries are the most
    common cause of problems encountered.
    If service is still required:
    1. Remove the batteries (if applicable) and pack the unit in a well padded, heavy
    corrugated box.
    2. Enclose a photocopy of your sales receipt, credit card statement, or other
    proof of the date of purchase, if within the warranty period.
    3. Enclose a check or money order payable to the order of SDI Technologies,
    for the sum of $2.00 ($4.00 without proof of purchase).
    4. Send the unit prepaid and insured, to the Factory Service Center listed below.
    Consumer Repair Department
    SDI Technologies Inc.
    1330 Goodyear Drive
    El Paso, TX 79936-6420
    Disclaimer of Warranty
    NOTE: This warranty is valid only if the product is used for the purpose for which
    it was designed. It does not cover (i) products which have been damaged by
    negligence or willful actions, misuse or accident, or which have been modified
    or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units
    damaged by excessive heat; (iii) damage to digital media players, CD’s or tape
    cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service
    Center and its return to the owner.
    This warranty is valid only in the United States of America and does not extend
    to owners of the product other than to the original purchaser. In no event will SDI
    Technologies or any of its affiliates, contractors, resellers, their officers, directors,
    shareholders, members or agents be liable to you or any third party for any
    consequential or incidental damages, any lost profits, actual, exemplary or punitive
    damages. (Some states do not allow limitations on implied warranties or exclusion
    of consequential damages, so these restrictions may not apply to you.) This
    warranty gives you specific legal rights, and you may also have other rights which
    vary from state to state.
    Your acknowledgement and agreement to fully and completely abide by the above
    mentioned disclaimer of warranty is contractually binding to you upon your transfer
    of currency (money order, cashier's check, or credit card) for purchase of your
    SDI Technologies product.
    © 2012 SDI Technologies, Inc. All rights reserved
    Questions? Visit www.ihomeaudio.com or call 1-800-288-2792 Toll Free.

    iB22-120612-A

    Printed in China

    Model: iB22

    Noise Isolation Earbuds

    with Interchangeable

    Ear Cushions

    Model: iB22 (Front)
    Print color : Black text on white paper
    Size of manual: 100mmW x 180mmH
    Date: Dec 6, 2012
    Using Your iHome Headphones
    The earpieces are marked “L” and “R”. Place the “L” earpiece in your left ear
    and the “R” earpiece in your right ear for proper fit and best sound. If the
    earpieces are inserted incorrectly they will not fit properly in your ears and the
    sound quality will not be satisfactory.
    Connect the headphone plug to the headphone jack of your music player. Be
    sure that the plug is fully inserted into the jack. If the plug is not fully inserted
    you may only hear sound from one earpiece.
    NOTE: Your headphones are supplied with three different size silicon tips
    (S-M-L) for maximum comfort and to seal out unwanted noise. The “M”
    (medium) size tips were installed at our factory. If you find that the installed
    tips are too small or too large for your ears, you may remove them and
    replace them with the larger or smaller size accessory tips. To replace the
    tips simply pull them off the earpieces. To install different size tips, push them
    on to the earpieces and make sure they are fully seated on each earpiece so
    that they do not come off when you remove the earpiece from your ear. If
    one of the tips remains in your ear when you remove the headphones,
    remove the tip carefully and avoid pushing it further into your ear canal. Seek
    medical assistance if one of the tips becomes lodged in your ear and you are
    unable to remove it.
    IMPORTANT! Listening at high volume for long periods of time can result in
    long-term hearing damage. For your safety, do not use headphones if they
    would prevent you from hearing warning sounds, such as while driving a car
    or motorcycle, riding a bike, etc.
    NOTE: In extremely cold or dry air conditions you may notice a slight ‘tingling’
    feeling in your ears when using in-ear headphones. This is the result of the
    build-up of static electricity in your body. This is normal and not an indication
    of any problem with your headphones.

    The hang tag at this top of the package also functions as a convenient cord

    management device. Pass the headphone plug through the opening in the

    hang tag as shown and then wind the headphone cord around the hang tag.

    This will keep your headphone cord tangle free and always ready to use.

    Cord Managment

iHome iB22

Tarvitsetko apua?

Kysymysten lukumäärä: 0

Onko sinulla kysyttävää tuotteesta iHome iB22 tai tarvitsetko apua? Esitä kysymyksesi täällä. Anna selkeä ja kattava kuvaus asiasta ja kysymyksestäsi. Mitä yksityiskohtaisemmin kuvaat asiaasi ja kysymystäsi, sitä helpompi muiden iHome iB22 omistajien on vastata kysymykseesi oikein.

Katso iHome iB22 käyttöohjeet täältä ilmaiseksi. Tämä opas kuuluu luokkaan Kuulokkeet, ja sen on arvioinut 1 ihmistä keskimäärin arvosanalla 7.5. Tämä opas on saatavana seuraavilla kielillä: Englanti. Onko sinulla kysyttävää tuotteesta iHome iB22 tai tarvitsetko apua? Esitä kysymyksesi täällä

iHome iB22 – tekniset tiedot

Yleistä
Tuotemerkki iHome
Malli iB22
Tuote Kuuloke
EAN 0047532901481
Kieli Englanti
Tiedoston tyyppi PDF

Usein Kysytyt Kysymykset

Alta löydät useimmin kysytyt kysymykset aiheesta iHome iB22.

Eikö kysymystäsi ole listassa? Esitä kysymyksesi täällä