iHome IBT15

iHome IBT15 käyttöohje

  • Thank you for purchasing the iHome iBT15. This product is designed to provide high quality wireless
    sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device.
    This instruction booklet explains the basic operation and care of the unit. Please read them carefully and
    keep for future reference.
    For proper splash-proof operation, make sure the seal on the left side of the unit is completely flush with
    the unit by pressing along the entire edge of the seal until it is completely and securely in place.
    The unit is IPX5 rated, meaning it will repel a stream of water for up to 5 minutes.
    DO NOT immerse the unit in water.
    Make sure seal and surrounding surfaces are completely dry before opening seal to prevent moisture
    from damaging the internal electronics.
    Keep seal free of dirt, sand, or other objects that can interfere with proper sealing. If for any reason
    the seal is not making a tight seal, water may enter the unit.
    DO NOT clean unit with oily soaps or use chemicals or solvents. Clean with damp cloth.
    Place the unit on a level surface away from sources of direct sunlight or excessive heat.
    Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other
    protective material should be placed between it and the furniture.
    Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents,
    such as benzene, thinner or similar materials can damage the surface of the unit.
    iBT15 EN-IB -
    Size: 214mm x 336mm
    Printing color: Black
    Jan 09, 2015
    100gsm2 WF (書紙)
    Consumer Product Safety Guide
    When used in the directed manner, this unit has been designed and manufactured to ensure your personal
    safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety
    and operating instructions carefully before installation and use, and keep these instructions handy for future
    reference. Take special note of all warnings listed in these instructions and on the unit.
    1. Water and Moisture – DO NOT immerse unit in water. Make sure the seal and surrounding surfaces
    are completely dry before opening seal to prevent moisture from damaging the internal electronics.
    Keep seal free of dirt, sand, or other objects that can interfere with proper sealing. If for any reason
    the seal is not making a tight seal, water may enter the unit.
    2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper
    ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block
    ventilation openings.
    3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or
    other appliances (including amplifiers) that produce heat.
    4. Power Sources – The unit should be connected to a power supply only of the type described in the
    operating instructions or as marked on the appliance.
    5. Cleaning – The unit should be cleaned only using a warm damp cloth. Do not use solvents, etc.
    6. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled
    into any openings or vents located on the product.
    7. Attachments – Do not use attachments not recommended by the product manufacturer.
    8. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the
    antenna or cable system during a lightning storm or when it is left unattended and unused for long
    periods of time. This will prevent damage to the product due to lightning and power-line surges.
    9. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as
    this can result in a risk of fire or electric shock.
    10. Damage Requiring Service – The unit should be serviced by qualified service personnel when:
    A. the power supply cable or plug has been damaged.
    B. objects have fallen into or liquid has been spilled into the enclosure.
    C. the unit has been exposed to rain.
    D. the unit has been dropped or the enclosure damaged.
    E. the unit exhibits a marked change in performance or does not operate normally.
    12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month
    or longer, fully charge the unit before storing.
    13. Servicing – The user should not attempt to service the unit beyond those methods described in the
    user’s operating instructions. Service methods not covered in the operating instructions should be
    referred to qualified service personnel.
    Questions? Visit www.ihome.com
    or call 1-800-288-2792 Toll Free
    Internal Rechargeable Lithium-ion Battery
    This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you
    suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact
    us for repair information.
    Please do NOT attempt to change the battery yourself. If the battery has died and you do not want us to replace
    your battery, you should follow the disposal instructions below:
    Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances.
    Always dispose of used batteries/electronics in accordance with the prevailing community regulations that apply
    to the disposal of batteries/electronics. If there are no local regulations concerning battery/electronics disposal,
    please dispose of the device in a waste bin for electronic devices.
    Many electronics retailers now recycle batteries and other electronic components at no charge. Check to see
    which ones in your area do so.
    The battery used in this device may present a risk of fire, explosion or chemical burn if
    Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal.
    Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other
    electrolytic substance.
    Always confirm that the temperature is 5°C – 35° C (41° - 95° Fahrenheit) before you charge the battery.
    Leakage or deterioration of the battery may occur if this warning is not heeded.
    Never expose the battery to any liquid.
    Never expose the battery to excessive heat such as direct sunlight or fire. Never use the battery pack in an
    unventilated vehicle where excessive internal temperatures may be encountered.
    Always keep the battery out of the reach of infants and small children.
    Wireless Speaker
    with Speakerphone
    instruction manual
    Model: iBT15
    FCC Information
    This device complies with Part 15 of the FCC Rules, operation is subject to the following two
    conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
    interference received, including interference that may cause undesired operation.
    FCC Radiation Exposure Statement
    This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
    This Device complies with RSS-210 of the IC Rules; Operation is subject to the following two
    (1) This device may not cause interference and
    (2) This device must accept any interference received, including interference that may cause
    undesired operation
    Warning: Changes or modifications to this unit not expressly approved by the party responsible
    for compliance could void the user’s authority to operate the equipment.
    NOTE: This equipment has been tested and found to comply with the limits for a Class B
    digital device, pursuant to Part 15 of the FCC Rules.
    These limits are designed to provide reasonable protection against harmful interference in a
    residential installation. This equipment generates, uses and can radiate radio frequency energy
    and, if not installed and used in accordance with the instructions, may cause harmful interference
    to radio communications.
    However, there is no guarantee that interference will not occur in a particular installation. If this
    equipment does cause harmful interference to radio or television reception, which can be determined
    by turning the equipment off and on, the user is encouraged to try to correct the interference by
    one or more of the following measures:
    Reorient or relocate the receiving antenna.
    Increase the separation between the equipment and receiver.
    Connect the equipment into an outlet on a circuit different from that to which the receiver is
    Consult the dealer or an experienced radio/TV technician for help.
    CAN ICES-3 (B)/NMB-3(B)
    IC Statement
    This device complies with Industry Canada RSS-210. Operation is subject to the following two
    conditions: (1) this device may not cause interference, and (2) this device must accept any
    interference, including interference that may cause undesired operation of the device.
    Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
    RSS-210. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
    produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
    subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
    The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and
    compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure
    and compliance.
    Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS
    102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne
    sur l'exposition et la conformité de rf.
    IC: 986B-IBT15
    Declaration ID D024962
    iBT15 EN-IB
    Size: 214mm x 336mm
    Printing color: Black
    Jan 09, 2015
    100gsm2 WF (書紙)
    Playing Audio via Aux In
    1. Connect one end of a 3.5mm audio cable (not
    included) to the Aux-in jack on the left side of the
    unit and connect the other end to the headphone or
    line-out jack on your audio device.
    Press the
    Power/End Call
    Button on the unit
    to turn
    it on.
    3. Power on the audio device and use the controls on
    the device to play or pause audio, and navigate
    4. Press t
    he or
    Button to adjust the system
    . You can also adjust volume on your device.
    5. When done listening, press the Power/End Call
    Button to turn the unit OFF. Remember to turn off
    your device, too.
    NOTE: Make sure no Bluetooth device is playing when
    you want to listen to Aux-in or you will hear Bluetooth
    instead of Aux-in. Pause the Bluetooth source and Aux-in
    audio will be heard in a moment.
    Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT15. Once your device is paired,
    the iBT15 can recognize it and you can play your audio through it.
    1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and make it
    “discoverable” by turning on Bluetooth mode (check in Options or Settings).
    2. Press the
    Power/End Call Button to turn on the iBT15. The first time the unit is powered on,
    it will enter auto-pairing mode and attempt to connect to a Bluetooth device. Otherwise, follow
    step 3 to begin pairing.
    3. Press and hold the Talk/Bluetooth/Play/Pause Button on the right of the unit for 2 seconds.
    The unit will beep twice and the status indicator LED will flash blue, indicating the unit is in pairing
    “iHome iBT15” should appear in your device’s Bluetooth menu. If “Not Paired”, “Not Connected” or similar
    message appears, select “iHome iBT15” to connect it. If prompted for
    a passcode, enter “1234” on your
    Meet Your iBT15
    Aux-in Jack
    Left Side
    Splash-resistant Cover
    Reset Button
    paperclip to
    reset unit)
    USB Charging
    Right Side
    Power/End Call
    Talk/Bluetooth Pairing/
    Play/Pause Button
    – Volume Button
    + Volume Button
    Status indicator LED
    Status indicator Status
    Solid red LED
    Solid blue LED
    Flashing red LED
    Quickly flashing blue LED
    Slowly flashing blue LED
    Unit is charging
    Unit needs charging
    Active Bluetooth connection / Aux mode
    Unit is attempting to pair with Bluetooth device
    Unit is attempting to auto link to already
    paired Bluetooth device
    Getting Started: Carabiner & Carry Strap
    The iBT15 has a built-in carbiner clip and comes with a carry strap for easy
    carrying or attaching to a backpack, shower head, etc.
    To attach the carry strap, form a small loop in one end of the strap. Insert this
    loop through the carabiner on top of the unit, then pull the loop back through
    the larger loop formed in the carry strap to tighten.
    Getting Started: Charging the Unit
    Charge unit before use. For first time charge, charge for at least 4 hours.
    Pull back splash-proof seal and connect the included micro USB cable to the
    USB Charging Port on the left side of the unit and connect the other standard
    USB plug to a computer, USB AC adaptor (not included) or other USB power
    source. The status indicator glows solid red while charging and turns off once
    Using the iBT15
    Computer USB port
    connected to
    working outlet
    USB AC adaptor
    (not included)
    USB AC adaptor
    connected to
    working outlet
    Once pairing is successful, a tone will sound and the Bluetooth indicator light will glow solid, indicating the
    ready to play music. There should also be an indication on your device. If no device is successfully
    3 minutes the iBT15 will default to previous mode. Once the iBT15 is paired to a device, it will
    attempt to autolink when the device is within range (about 30 feet).
    iHome iBT15 iHome iBT15
    iHome iBT15
    iHome iBT15
    For other
    Using the iBT15
    Pairing with a Different Device
    When you power ON the speaker, it will automatically link with the previously paired Bluetooth device
    as long as that device is still within range (approx. 30 feet). To pair with a different device follow steps
    1 - 4 under ”Pairing Your Device” on previous page.
    Playing Audio Via Bluetooth
    Press the
    Power/End Call
    to turn on the unit. The status indicator will glow solid blue when
    a linked device is in range and detected. You can then listen to audio streamed wirelessly from your
    paired iPad, iPhone, iPod or other Bluetooth device.
    2. Press the Talk/Bluetooth/Play/Pause Button to play audio from your device. Press again to pause
    play and once more to resume play. When Bluetooth audio is active, the status indicator will glow
    solid blue.
    3. Use menu and track controls on your Bluetooth device to navigate tracks.
    4. Press the or + Button to adjust the iBT15 volume. A confirmation tone will sound when minimum or
    maximum volume is reached. You can also adjust volume on your device.
    5. When done listening, press the Power/End Call Button to turn the unit OFF. Remember to turn off
    your device, too.
    Speakerphone Operation
    NOTE: The unit must be powered and linked to a Bluetooth phone to receive a call.
    1. When a call is received, playing music is muted to hear the ring tone. Press the Talk/
    Bluetooth/Play/Pause Button to answer the call, or press the Power/End Call Button to ignore it.
    For call waiting function, use phone controls on your device.
    2. When a call is completed, press the Power/End Call Button to end the call and resume previous
    Using the iBT15
    Mobile Phone
    Game Devices
    Using the iBT15
    Unit doesn’t respond (no power)
    • Check that unit is fully charged.
    • Make sure your device is properly paired with the iBT15.
    • Make sure the Power is ON.
    Unit doesn’t respond (locked up or frozen)
    If the unit does not respond, insert the end of a paperclip or similar into the Reset Button located under
    the splash proof cover to reset the unit.
    Resetting Bluetooth
    If Bluetooth function is not operating properly, you may wish to reset Bluetooth. To do so, press and hold
    the Power/End Call Button for 10 seconds. You will hear a long high tone. You will need to re-pair
    your paired devices.
    Trouble pairing device/computer with iBT15
    Bluetooth implementation varies depending on your device’s hardware and operating system. Please see
    our website for updates on pairing.
    Make sure you have the latest firmware for your device.
    • Make sure your device is working properly. Check your device’s manual for details on Bluetooth
    pairing and linking.
    When you power ON the speaker, it will automatically link with the last previously paired Bluetooth
    device if the device is still within range (approx.30 feet). To pair with a different device press and hold
    the Talk/Pairing/Play/Pause Button for 2-3 seconds.
    For further information and to see the latest instructions, visit www.ihome.com/support
    TIP: On some iOS (Apple) devices, you
    can view the iBT15 battery status on
    your device’s screen. When device is
    paired and connected, look for a
    vertical battery icon next to the
    Bluetooth icon on the
    upper right corner of the
    device’s screen.
    Press the
    Power/End Call
    to turn ON or OFF.
    The unit will respond in a moment.
iHome IBT15

Tarvitsetko apua?

Kysymysten lukumäärä: 0

Onko sinulla kysyttävää tuotteesta iHome IBT15 tai tarvitsetko apua? Esitä kysymyksesi täällä. Anna selkeä ja kattava kuvaus asiasta ja kysymyksestäsi. Mitä yksityiskohtaisemmin kuvaat asiaasi ja kysymystäsi, sitä helpompi muiden iHome IBT15 omistajien on vastata kysymykseesi oikein.

Katso iHome IBT15 käyttöohjeet täältä ilmaiseksi. Tämä opas kuuluu luokkaan Lataustelineet, ja sen on arvioinut 1 ihmistä keskimäärin arvosanalla 8.8. Tämä opas on saatavana seuraavilla kielillä: Englanti. Onko sinulla kysyttävää tuotteesta iHome IBT15 tai tarvitsetko apua? Esitä kysymyksesi täällä

iHome IBT15 – tekniset tiedot

Tuotemerkki iHome
Malli IBT15
Tuote Latausteline
EAN 0047532907667
Kieli Englanti
Tiedoston tyyppi PDF
Elementtien määrä 1
Kaiuttimien lukumäärä 1
Äänilähdön kanavat -
Nimellisteho RMS -W
Yhteysteknologia Langallinen & langaton
AUX in
3,5 mm liitin
- Bluetooth/3.5 mm
Tuotetyyppi -
Muotoilu Muu
Tuotteen väri Sininen
Äänenvoimakkuuden säätö Digitaalinen
International Protection (IP)-koodi IPX5
Suojaustoiminnot Roisketiivis
Suositeltu käyttö Tabletti/Älypuhelin
Virtalähteen malli Akku
Akkutyyppi Sisäinen
Akkuteknologia Litiumioni (Li-Ion)
Paino ja mitat
Tuotteen leveys 82mm
Tuotteen syvyys 39mm
Tuotteen korkeus 114mm
Paino 159g


Etsitkö manuaalia? Käyttöoh.je varmistaa, että löydät hetkessä sen manuaalin, jota etsit. Meidän tietokantamme sisältää yli 1 miljoonaa PDF manuaalia yli 10,000 merkiltä. Lisäämme päivittäin viimeisimpiä manuaaleja, jotta löydät aina tuotteen jota etsit. Tämä on todella yksinkertaista: kirjoitat vaan tuotteen merkin ja tyypin hakupalkkiin, ja voit välittömästi katsoa valitsemaasi manuaalia ilmaisesti onlinessa..


© Copyright 2020 Käyttöoh.je. Kaikki oikeudet pidätetään.

Käytämme evästeitä jotta voimme antaa sinulle parhaan kokemuksen sivuillamme. Jos jatkat tämän sivuston käyttöä, oletamme että hyväksyt ne.

Lue lisää