iHome iBT55 käyttöohje

iHome iBT55
  • Sivuluku: 2
  • Tiedoston tyyppi: PDF
  • FCC Information
    FCC Radiation Exposure Statement
    This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
    environment. This transmitter must not be co-located or operating in conjunction with any other
    antenna or transmitter.
    Place the unit on a level surface away from sources of direct sunlight or excessive
    Protect your furniture when placing your unit on a natural wood and lacquered finish.
    A cloth or other protective material should be placed between it and the furniture.
    Clean your unit with a soft cloth moistened only with mild soap and water. Stronger
    cleaning agents such as thinner or similar materials can damage the surface of the


    IC : 986B-IBT55



    Micro Speaker

    Limited 1 Year Warranty Information

    Printed in China
    iBT55 IB (Front)
    Size: 324mm x 184mm
    Printing color: Black
    Date: July 16, 15.
    *Top Team
    Read before proceeding
    If you have any question regarding the operation or use of this product, please visit www.ihome.com
    to view answers to frequently asked questions.
    To learn more about this and other iHome products, please visit us online at www.ihome.com

    Questions? Visit www.ihome.com

    This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
    to the following two conditions:
    (1) this device may not cause interference, and
    (2) this device must accept any interference, including interference that may cause undesired
    operation of the device.
    The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and
    compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure
    and compliance.
    Warning: Changes or modifications to this unit not expressly approved by the party responsible
    for compliance could void the user’s authority to operate the equipment.
    NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
    device, pursuant to Part 15 of the FCC Rules.
    These limits are designed to provide reasonable protection against harmful interference in a residential
    installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
    and used in accordance with the instructions, may cause harmful interference to radio communications.
    However, there is no guarantee that interference will not occur in a particular installation. If this equipment
    does cause harmful interference to radio or television reception, which can be determined by turning
    the equipment off and on, the user is encouraged to try to correct the interference by one or more of
    the following measures:
    Reorient or relocate the receiving antenna.
    Increase the separation between the equipment and receiver.
    Connect the equipment into an outlet on a circuit different from that to which the receiver is
    Consult the dealer or an experienced radio/TV technician for help.
    CAN ICES-3 (B)/NMB-3(B)
    This device complies with Part 15 of the FCC Rules, operation is subject to the following two
    conditions: (1) This device may not cause harmful interference, and (2) this device must accept
    any interference received, including interference that may cause undesired operation.



    iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants
    this product to be free from defects in workmanship and materials, under normal use and
    conditions, for a period of one (1) year from the date of original purchase.
    Should this product fail to function in a satisfactory manner, it is best to first return it to the
    store where it was originally purchased. Should this fail to resolve the matter and service
    still be required by reason of any defect or malfunction during the warranty period, SDI will
    repair or, at its discretion, replace this product without charge. This decision is subject to
    verification of the defect or malfunction upon delivery of this product to the Factory Service
    Center authorized by Customer Service.
    If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return
    Authorization Number and shipping instructions.
    Disclaimer of Warranty
    NOTE: This warranty is valid only if the product is used for the purpose for which it was
    designed. It does not cover (i) products which have been damaged by negligence or willful
    actions, misuse or accident, or which have been modified or repaired by unauthorized
    persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage
    to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this
    product to the Factory Service Center and its return to the owner.
    This warranty is valid only in the United States of America and does not extend to owners
    of the product other than to the original purchaser. In no event will SDI or any of its affiliates,
    contractors, resellers, their officers, directors, shareholders, members or agents be liable
    to you or any third party for any consequential or incidental damages, any lost profits,
    actual, exemplary or punitive damages. (Some states do not allow limitations on implied
    warranties or exclusion of consequential damages, so these restrictions may not apply to
    you.) This warranty gives you specific legal rights, and you may also have other rights
    which vary from state to state.
    Your acknowledgement and agreement to fully and completely abide by the above mentioned
    disclaimer of warranty is contractually binding to you upon your transfer of currency (money
    order, cashier's check, or credit card) for purchase of your SDI product.
    © 2015 SDI Technologies, Inc. All rights reserved
    Questions? Visit www.ihome.com
    or call 1-800-288-2792 Toll Free

    Model: iBT55

    iBT55 IB (Back)





    icro S


    A Consumer Guide to Product Safety

    When used in the directed manner, this unit has been designed and manufactured to ensure
    your personal safety. However, improper use can result in potential electrical shock or fire
    hazards. Please read all safety and operating instructions carefully before installation and use,
    and keep these instructions handy for future reference. Take special note of all warnings listed
    in these instructions and on the unit.
    1. Water and MoistureThe unit should not be used near water. For example: near a
    bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
    2. VentilationThe unit should be situated so that its location or position does not interfere
    with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or
    similar surface that may block ventilation openings. Also, it should not be placed in a
    built-in installation, such as a bookcase or cabinet, which may impede the flow of air
    through the ventilation openings.
    3. Heat – The unit should be situated away from heat sources such as radiators, heat
    registers, stoves or other appliances (including amplifiers) that produce heat.
    4. Power Sources – The unit should be connected to a power supply only of the type
    described in the operating instructions or as marked on the appliance.
    5. Power-Cable Protection – Power supply cables should be routed so that they are not
    likely to be walked on or pinched by items placed upon or against them. It is always best
    to have a clear area from where the cable exits the unit to where it is plugged into an AC
    6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance
    section of this manual for cleaning instructions.
    7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids
    are not spilled into any openings or vents located on the product.
    8. Attachments – Do not use attachments not recommended by the product manufacturer.
    9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and
    disconnect the antenna or cable system during a lightning storm or when it is left unattended
    and unused for long periods of time. This will prevent damage to the product due to
    lightning and power-line surges.
    10. Overloading – Do not overload wall sockets, extension cords, or integral convenience
    receptacles as this can result in a risk of fire or electric shock.
    11. Damage Requiring Service – The unit should be serviced by qualified service personnel
    A. the power supply cable or plug has been damaged.
    B. objects have fallen into or liquid has been spilled into the enclosure.
    C. the unit has been exposed to rain.
    D. the unit has been dropped or the enclosure damaged.
    E. the unit exhibits a marked change in performance or does not operate normally.
    12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such
    as a month or longer, the power cable should be unplugged from the unit to prevent
    damage or corrosion.
    13. Servicing – The user should not attempt to service the unit beyond those methods
    described in the user’s operating instructions. Service methods not covered in the
    operating instructions should be referred to qualified service personnel.


    Unit doesn’t respond (no power)
    • Make sure unit is completely charged.
    • Make sure your device is properly paired with the iBT55.
    • Make sure the Power is ON (Right) position.
    Trouble pairing device/computer with iBT55
    • When you power ON the speaker, it will automatically link with the last previously paired
    Bluetooth device if the device is still within range (approx. 30 feet). To pair with a different
    device you must turn off Bluetooth capability on the already paired device, or take it out
    of range.
    • If your device does not auto-link when within range, re-pair the device. To do so, first
    delete the iBT55 from your Bluetooth devices menu. Move the Power Switch to ON
    (Right) position to begin pairing (see Using Bluetooth with the MicroGo+ for pairing
    • Make sure your device is working properly. Check your device’s manual for details on
    Bluetooth pairing and linking.
iHome iBT55

Tarvitsetko apua?

Kysymysten lukumäärä: 0

Onko sinulla kysyttävää tuotteesta iHome iBT55 tai tarvitsetko apua? Esitä kysymyksesi täällä. Anna selkeä ja kattava kuvaus asiasta ja kysymyksestäsi. Mitä yksityiskohtaisemmin kuvaat asiaasi ja kysymystäsi, sitä helpompi muiden iHome iBT55 omistajien on vastata kysymykseesi oikein.

Katso iHome iBT55 käyttöohjeet täältä ilmaiseksi. Tämä opas kuuluu luokkaan Kaiuttimet, ja sen on arvioinut 1 ihmistä keskimäärin arvosanalla 7.5. Tämä opas on saatavana seuraavilla kielillä: Englanti. Onko sinulla kysyttävää tuotteesta iHome iBT55 tai tarvitsetko apua? Esitä kysymyksesi täällä

iHome iBT55 – tekniset tiedot

Tuotemerkki iHome
Malli iBT55
Tuote Kaiutin
EAN 0047532909197, 4923143115386
Kieli Englanti
Tiedoston tyyppi PDF

Usein Kysytyt Kysymykset

Alta löydät useimmin kysytyt kysymykset aiheesta iHome iBT55.

Eikö kysymystäsi ole listassa? Esitä kysymyksesi täällä