1 July 2010
A-61682 Part No. 6J7965
Installation Instructions for the Kodak Enhanced Printer
Accessory for use with Kodak i5000 Series Scanners
Following are instructions for installing the Kodak Enhanced Printer Accessory for the i5000 Series
Scanners. See the User’s Guide for procedures on how to use this accessory.
The Kodak Enhanced Printer Accessory includes:
1 Upper imaging guide
1 Upper flippable background accessory
1 Enhanced Printer carrier
1 Enhanced Printer black ink cartridge
1 Drainage strip
1 Printed circuit board accessory
1 Printer position/instruction label
1 Set of ink blotters
NOTE: Additional ink colors and replacement ink
cartridges can be purchased online at:
Before you begin be sure the scanner is turned off
1. Open the scanner cover.
2. Loosen the thumbscrews on each end of the
upper imaging guide and remove it from its
3. Install the Enhanced Printer imaging guide and
tighten the screws to secure the imaging guide.
Do not over-tighten.
NOTE: Be sure to install the upper imaging guide
in the correct orientation.
4. Loosen the upper flippable background acces-
sory. Use the screwdriver provided to loosen
all four thumbscrews.
5. Unplug the connector to release and remove
the flippable background.
6. Install the flippable background by connecting
the cable and aligning the springs on the end
of the flippable background. Tighten the
thumbscrews in place. Do not over-tighten.