Instructions for the installer
INSTRUCTIONS FOR TRANSFORMATION
CONTENTS OF THE PACK
THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE. IT MUST BE KEPT
IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE
WORKING LIFE OF THE PRODUCT. INSTALLATION MUST BE CARRIED OUT
BY QUALIFIED PERSONNEL IN ACCORDANCE WITH THE REGULATIONS IN
FORCE. THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR
It contains all the components and the necessary instructions for
converting the barbecue power from GPL gas to METHANE gas.
The appliance is factory set to run on GPL gas; to transform it you must
change the nozzles on all the burners, regulate the primary air and also
regulate the minimum flame on the gas taps.
At the end of these operations, replace the label “regulated for gas” on the
back of the barbecue with the label provided.
THE INSTALLATION MUST BE CARRIED OUT BY A
WARNING: Keep the product's standard installation nozzles and the
“regulated for gas” label, since reconversion from METHANE gas to GPL
gas could be necessary in the future.
In the case of reconversion to GPL gas, the conversion procedure is
identical to that described below for METHANE gas.
The contents of the methane gases transformation pack are listed below:
• NOZZLES FOR METHANE GAS.
• LABEL “REGULATED FOR GAS”
(TO BE APPLIED AFTER THE