Sony WM-GX788

Sony WM-GX788 käyttöohje

  • Tab for side A
    Radio Cassette-Corder
    ©2003 Sony Corporation Printed in Malaysia
    To prevent fire or shock hazard, do not expose
    the unit to rain or moisture.
    Do not install the appliance in a confined space, such as a bookcase or
    built-in cabinet.
    Operating instructions
    Playing a Tape
    1 Insert a cassette and if the
    HOLD function is on, slide
    the HOLD switch in the
    opposite direction of the
    arrow to unlock the
    2 Press MENU repeatedly to
    set “__” (the cursor) in the
    display to REC/PB. Then
    press SET to select “
    or none (normal speed)
    which is the same position
    as that used for recording.
    To playback commercially
    available music tape, etc.,
    select normal (no
    3 Press Y•REPEAT on the
    main unit and adjust the
    volume with VOL. (On the
    remote control, press
    When adjusting the volume on
    the remote control
    Set the VOL control on the main
    unit to around 6.
    When adjusting the volume on
    the main unit
    Set the VOL control on the remote
    control at maximum.
    Operation on the remote
    To Press
    Switch Yx for 2
    playback to seconds or more
    the other side during playback
    Stop playback Yx once
    during playback
    Operation on the main
    To Press
    Switch Y•REPEAT
    playback to during playback
    the other side
    Stop playback x (stop)
    Other tape operations
    To Press
    Fast forward* FF/CUE (FF +
    on the remote
    control) during
    Rewind* REW/REVIEW
    (REW – on the
    remote contorl)
    during stop
    Search forward Press and hold
    during FF/CUE (FF +
    playback on the remote
    (CUE) control) and
    release it at the
    point you want.
    Search Press and hold
    backward REW/REVIEW
    during (REW – on the
    playback remote control)
    (REVIEW) and release it at
    the point you
    Tapes recorded with setting to
    ” cannot be played
    properly on a cassette player/
    tape recorder without this
    To prevent fire, do not cover
    the ventilation of the apparatus
    with newspapers, table-cloths,
    curtains, etc. And don’t place
    lighted candles on the
    To prevent fire or shock
    hazard, do not place objects
    filled with liquids, such as
    vases, on the apparatus.
    Certain countries may regulate
    disposal of the battery used to
    power this product. Please
    consult with your local
    Prepare a dry battery (not
    supplied) or the rechargeable
    battery (supplied).
    Dry Battery A
    Attach the supplied battery case,
    and then insert one R6 (size AA)
    battery with correct polarity.
    For maximum performance we
    recommend that you use a Sony
    alkaline battery.
    Rechargeable Battery
    Charge the rechargeable battery
    before using it for the first time.
    1 Insert the supplied
    rechargeable battery NH-
    14WM (A) into the
    rechargeable battery
    compartment with correct
    2 Connect the supplied AC
    power adaptor to the charging
    stand, plug in the AC power
    adaptor to the house current
    If the plug does not fit to your
    mains, attach the supplied AC
    plug adaptor (Saudi Arabian
    model only).
    3 Place the main unit on the
    charging stand.
    The CHG lamp will light up.
    Full charging takes about 6
    The CHG lamp will go off
    when the battery is fully
    Do not use the unit while charging.
    Remove the unit from the charging
    stand when using it.
    If you operate the unit while
    charging, the battery will not be
    If you operate the unit while
    charging, it may cause
    Do not place the unit on the
    charging stand without the
    rechargeable battery. Otherwise, it
    may cause malfunction.
    When to replace/
    charge the battery C
    Replace or charge the battery
    when “ ” flashes in the display.
    Battery life* (Approx. hours)
    Sony alkaline LR6 (SG)**
    Tape playback 44
    Radio reception 56
    MIC recording 15
    Radio recording 12
    Rechargeable battery
    NH-14WM (A)
    Tape playback 26
    Radio reception 34
    MIC recording 9
    Radio recording 7
    Sony alkaline LR6 (SG)** and
    Rechargeable NH-14WM (A)
    Tape playback 70
    Radio reception 90
    MIC recording 24
    Radio recording 19
    * Measured value by the standard
    of JEITA (Japan Electronics and
    Information Technology
    Industries Association). (Using a
    Sony HF series cassette tape)
    ** When using a Sony LR6(SG)
    “STAMINA” alkaline dry battery
    (produced in Japan).
    The battery life may be shorter
    depending on the operating
    condition, the surrounding
    temperature and battery type.
    The AVLS setting (see “Using the
    Menu”) will be cancelled when
    you replace the battery.
    House Current D
    You must purchase an AC power
    adaptor AC-E15HG to operate
    this unit using house current.
    Remove the rechargeable battery
    if inserted. Attach the battery case
    and connect the AC power
    adaptor AC-E15HG (not supplied)
    to the DC IN 1.5 V jack of the
    battery case and to the wall outlet.
    Do not use any other AC power
    Specifications for AC-E15HG
    vary for each area. Check your
    local voltage and the polarity of
    the plug before purchasing.
    To Press
    Play the next FF/CUE (FF +
    track/ on the remote
    succeeding 9 control) once/
    tracks from the repeatedly
    beginning during playback
    Play the current REW/REVIEW
    track/previous (REW – on the
    8 tracks from remote control)
    the beginning once/repeatedly
    (AMS**) during playback
    Play the other FF/CUE (FF +
    side from the on the remote
    beginning control) for 2
    (Skip Reverse seconds or more
    function) during stop
    Play the same REW/REVIEW
    side from the (REW – on the
    beginning remote contorl)
    (Rewind Auto for 2 seconds or
    Play function) more during
    * Press Yx on the remote
    control during fast forward or
    rewind to start playback.
    **Automatic Music Sensor
    A-B Repeat
    A-B Repeat plays back repeatedly
    any portion of the tape you
    specified. Specify by tagging the
    beginning (point A) and the end
    (point B) of the portion during
    On the main unit
    1 Press Y•REPEAT for 2
    seconds or more during
    playback to tag point A.
    “A-” will flash in the display of
    the main unit.
    2 Press Y•REPEAT again to
    tag point B.
    “A-B” will flash and the tape
    will move rapidly to point A.
    Then “REP” appears in the
    display and the specified
    portion is played repeatedly.
    On the remote control
    1 Press Yx twice quickly
    during playback to tag point A.
    2 Press Yx once more to tag
    point B.
    The tape will be rewound to
    point A. Then the specified
    portion is played repeatedly.
    To stop the A-B Repeat
    Press Y•REPEAT on the main
    On the remote control, press
    To reset A-B Repeat
    When you want to change a
    specific portion, stop the A-B
    Repeat playback and tag point A
    and point B again.
    You cannot specify a repeat
    portion that includes both sides of
    the tape.
    You cannot specify a repeat
    portion shorter than 2 seconds.
    After repeated operation, the
    actual portion that is played back
    may shift somewhat from the
    exact portion specified with the
    tags due to tape slack.
    A-B Repeat stops automatically
    after repeating 50 times.
    Do not use the A-B Repeat
    function with tapes longer than 90
    minutes. If you do, the tape may
    be damaged.
    Recording F
    You can record radio programs
    from the built-in radio, or record
    with the supplied microphone. In
    either case, use a new or fully
    charged battery.
    If the record-protect tab is broken,
    you cannot record on that side.
    1 Insert a normal (TYPE I)
    To record on both sides
    Insert the cassette with the
    side to be first recorded on
    as the FWD (forward)
    * Make sure that “FWD” is
    displayed. If not, press and
    hold x until “REV” changes to
    To record on one side
    Insert the cassette with the
    side to be recorded on as
    the REV (reverse) side**.
    **Make sure that “REV” is
    displayed. If not, press and
    hold x until “FWD” changes
    to “REV”.
    When the cassette holder is
    opened, the direction of the tape
    will be automatically set to
    2 Press MENU repeatedly to
    set the cursor in the
    display to REC/PB. Then
    press SET to select “
    or none (normal speed).
    Normal (no indication)
    (4.8cm/s): for optimum
    sound. Recommended for
    normal recordings.
    2× (2.4cm/s): for double
    recording time (for
    example, 120 minutes
    using both sides of a 60-
    minute cassette). Suitable
    for recording conferences,
    dictations, etc. Not
    recommended for
    recording music.
    3 Select a recording source:
    To record with the
    Connect the supplied
    microphone to the MIC
    (PLUG IN POWER) jack.
    You can attach the
    microphone to your
    clothes as illustrated.
    To record from the radio
    Tune in to the station you
    want to record (see
    “Listening to the Radio”).
    Side A
    FWD (forward) side
    REV (reverse) side
    DC IN 1.5 V
    REW –
    Plug in firmly.
    FF +
    Printed using VOC (Volatile Organic Compound)-free
    vegetable oil based ink.
    “WALKMAN” is a registered trademark of Sony Corporation to represent Headphone Stereo
    is a trademark of Sony Corporation.
    The validity of the CE marking is restricted to only those countries where it
    is legally enforced, mainly in the countries EEA (European Economic Area).
    For customers in the United States
    Owner’s Record
    The model number is located on the front and the serial number is located
    inside the cassette holder. Record these numbers in the space provided
    below. Refer to them whenever you call upon your Sony dealer regarding
    this product.
    Model No. WM-GX788
    Serial No.
    Product registration
    Please register this product on line at
    Proper registration will enable us to send you periodic mailings about new
    products, services, and other important announcements. Registering your
    product will also allow us to contact you in the unlikely event that the product
    needs adjustment or modification. Thank you.
    This equipment has been tested and found to comply with the limits for a Class B digital
    device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
    protection against harmful interference in a residential installation. This equipment generates,
    uses, and can radiate radio frequency energy and, if not installed and used in accordance
    with the instructions, may cause harmful interference to radio communications. However,
    there is no guarantee that interference will not occur in a particular installation. If this
    equipment does cause harmful interference to radio or television reception, which can be
    determined by turning the equipment off and on, the user is encouraged to try to correct the
    interference by one or more of the following measures:
    – Reorient or relocate the receiving antenna.
    – Increase the separation between the equipment and receiver.
    – Connect the equipment into an outlet on a circuit different from that to which the receiver is
    Consult the dealer or an experienced radio/TV technician for help.
    This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
    (1) This device may not cause harmful interference, and
    (2) this device must accept any interference received, including interference that may cause
    undesired operation.
    You are cautioned that any changes or modifications not expressly approved in this manual
    could void your authority to operate this equipment.
    4 Slide REC.
    ” appears in the
    display and recording
    starts after about 2
    If you have started
    recording from the FWD
    side, recording will switch
    to reverse side
    automatically at the end of
    the FWD side.
    To stop recording
    Press x (on the remote control,
    press Yx to stop recording).
    To reduce noise while
    recording AM programs
    Set the ISS (Interference Suppress
    Switch) to the position that
    reduces noise the most.
    To monitor the recording
    You can monitor the recording
    sound through headphones/
    earphones. Adjust monitoring
    level using VOL.
    You may hear some noise in the
    monitor sound in the RV, MB, or
    GRV mode (see “Using the Menu”),
    but this does not affect recording.
    Notes on recording
    The recording level is fixed.
    Sound emphasis (RV, MB, or
    GRV) and AVLS settings do not
    affect recording.
    Actual recording will start about 2
    seconds (3 seconds when “
    is selected for recording time)
    after you slide the REC button.
    Slide the REC button about 2
    seconds (3 seconds when “
    is selected for recording time)
    before the moment you want to
    start recording, or you will miss
    the beginning of your recording.
    When recording on both sides,
    recording will not be made for
    about 10 seconds while the tape is
    switching sides.
    Do not use a high-position (TYPE
    II) or metal (TYPE IV) tape. If you
    do, the sound may be distorted
    when you play back the tape, or
    the previous recording may not be
    erased completely.
    Do not connect or disconnect the
    headphones/earphones to/from
    i while recording from the radio.
    The recording condition may
    change abruptly, or noise may be
    To avoid noise interference, do
    not place it near a lamp cord or a
    fluorescent lamp when recording
    with the microphone.
    If a howling effect occurs, turn
    down the volume.
    All other operation cannot be
    made while recording. For other
    operation, stop recording first.
    To prevent a tape from
    being accidentally
    recorded over
    Break off the tabs from side A
    and/or B. To reuse the tape for
    recording, cover the tab hole with
    adhesive tape.
    (turn over)
    * There is a tactile dot beside VOL on the main unit to show the direction to
    turn up the volume.
    **The button or jack has a tactile dot.
    AC-E15HG (not supplied)
Sony WM-GX788

Tarvitsetko apua?

Kysymysten lukumäärä: 0

Onko sinulla kysyttävää tuotteesta Sony WM-GX788 tai tarvitsetko apua? Esitä kysymyksesi täällä. Anna selkeä ja kattava kuvaus asiasta ja kysymyksestäsi. Mitä yksityiskohtaisemmin kuvaat asiaasi ja kysymystäsi, sitä helpompi muiden Sony WM-GX788 omistajien on vastata kysymykseesi oikein.

Katso Sony WM-GX788 käyttöohjeet täältä ilmaiseksi. Tämä opas kuuluu luokkaan Kasettisoittimet, ja sen on arvioinut 1 ihmistä keskimäärin arvosanalla 9.3. Tämä opas on saatavana seuraavilla kielillä: Englanti. Onko sinulla kysyttävää tuotteesta Sony WM-GX788 tai tarvitsetko apua? Esitä kysymyksesi täällä

Sony WM-GX788 – tekniset tiedot

Tuotemerkki Sony
Malli WM-GX788
Tuote Kasettisoitin
Kieli Englanti
Tiedoston tyyppi PDF


Etsitkö manuaalia? Käyttö varmistaa, että löydät hetkessä sen manuaalin, jota etsit. Meidän tietokantamme sisältää yli 1 miljoonaa PDF manuaalia yli 10,000 merkiltä. Lisäämme päivittäin viimeisimpiä manuaaleja, jotta löydät aina tuotteen jota etsit. Tämä on todella yksinkertaista: kirjoitat vaan tuotteen merkin ja tyypin hakupalkkiin, ja voit välittömästi katsoa valitsemaasi manuaalia ilmaisesti onlinessa..


© Copyright 2020 Käyttö Kaikki oikeudet pidätetään.

Käytämme evästeitä jotta voimme antaa sinulle parhaan kokemuksen sivuillamme. Jos jatkat tämän sivuston käyttöä, oletamme että hyväksyt ne.

Lue lisää